Loading... Please wait...

New England HRC Prusik Cord

  • New England HRC Prusik Cord
  • New England HRC Prusik Cord
Price:
$534.40
SKU:
NE2950
Brand:
Weight:
8.00 LBS
Shipping:
Calculated at checkout


Product Description

Product Description:
Unique heat-resistant cover of blended Technora and spun Nomex. The Vectran core offers very high tensile and low stretch. Provides dramatically improved performance and safety. Lasts longer than traditional prusiks for improved efficiency.

Features:

  • Great hand; supple
  • Excellent grip
  • Non-melting
  • Non-Glazing

Applications:

  • Prusik Cord

Colors Available:

  • Natural

Lengths Available:

  • 3' (assembled)
  • 300'
  • 600'
SizeWeightTensile
lbs/100'g/mlbskg
 5/16" (8mm)  3.3  49.1  7,250  3,289

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Good resistance to most minerals / organics, acids, weak alkalis, bleaches and other oxidizing agents and most solvents.

Heat:
Vectran melts at 660°F with progressive strength loss above 430°F. Technora melts at 1200' F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
N/A

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Not Applicable

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the New England HRC Prusik Cord to your wish list.

You Recently Viewed...