Loading... Please wait...

New England STS-12 (formerly Endura 12) x 600ft.

  • New England Endura 12 STS-12 Colors
  • New England Endura 12 STS-12
Price:
$243.60
SKU:
NE152-STS12
Brand:
Weight:
8.00 LBS
Shipping:
Calculated at checkout


Product Description

**Larger diameters available, email cbknot@cbknot.com or call 509-291-3024 for pricing and availability**

Product Description:
Endura 12 is manufactured from 100% HMPE fiber. The result is a rope that is extremely high strength, very lightweight, and very low stretch. The 12-strand single braid construction is supple, non-rotational, and easily spliced. Endura 12 is ideally suited for wire replacement and where weight is a primary design consideration.

Features:

  • Excellent strength-to-weight ratio
  • Excellent wet/dry strength retention
  • Floats
  • Will not absorb water
  • Urethane coated for improved abrasion resistance and color coding
  • Spliceable

Applications:

  • Replacement for steel cable
  • Winch lines
  • Helicopter lifting lines
  • Underground pulling lines
  • Slings
  • Tug boat tow lines

Colors Available:

  • White
  • Blue
  • Red
  • Green
  • Grey

Lengths Available:

SizeWeightTensile
lbs/100'g/mlbskg
 1/8" (3mm)  0.5  7.4  2,800  1,273
 3/16" (5mm)  1.1  16.4  6,100  2,773
 1/4" (6mm)  1.7  25.3  9,700  4,409
 5/16" (8mm)  2.6  38.7  14,500  6,591
 3/8" (10mm)  3.4  50.6  18,800  8,546
 7/16" (11mm)  4.2  62.5  24,000  10,909
 1/2" (12mm)  6.2  92.2  34,300  15,591
 9/16" (14mm)  7.2  107.1  42,000  19,091
 5/8" (16mm)  10.1  150.3  58,000  26,364
 3/4" (18mm)  13.8  205.3  69,000  31,364
 7/8" (22mm)  18.8  279.7  97,500  44,318
 1" (24mm)  21.4  318.4  115,900  52,682
 1 1/8" (28mm)  31.8  473.1  149,000  58,980
 1 1/4" (30mm)  36.5  543  176,000  79,837
 1 5/16" (32mm)  41.8  621.9  184,000  83,461
 1 1/2" (36mm)  51.8  770.5  235,000  106,600

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agents and to most solvents.

Heat:
HMPE melts at 300°F with progressive strength loss above 150°F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
12-Strand Eye Splice - Brummel 

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the New England STS-12 (formerly Endura 12) x 600ft. to your wish list.

You Recently Viewed...