Loading... Please wait...

New England T-100

  • New England T-100
Price:
$477.50
SKU:
NE2850-SPOOL
Brand:
Weight:
10.00 LBS
Shipping:
Calculated at checkout


Product Description

**Larger diameters p to 1 1/8" available.  Email cbknot@cbknot.com or call 509-291-3024 for availability and pricing. 

Product Description:
100% Technora core with a polyester jacket. The strength member core of this rope yields high tensile strength and has very low stretch and creep. Additionally, Technora has very good resistance to heat making T-100 an ideal choice in applications where heat persists.

***PRODUCT IS WHITE WITH YELLOW/RED TRACER

Features:

  • Very high strength
  • Very low stretch
  • Very high melting point
  • Very low creep

Applications:

  • Any high strength, low stretch application

Colors Available:

  • White with yellow/red tracers

Lengths Available:

  • 1500'
  • 1200'
  • 900'
  • 600'
SizeWeightTensile
lbs/100'g/mlbskg
 3/32" (2mm)  0.60  8.2  1,050  476
 1/8" (3mm)  0.8  11.9  2,000  905
 5/32 (4mm)  0.9  13.8  2,900  1,315
 3/16" (5mm)  1.2  18.3  3,100  1,406
 1/4" (6mm)  1.9  28.3  5,050  2,291
 5/16" (8mm)  3.2  47.6  6,750  3,063
 3/8" (10mm)  4.4  65.5  10,900  4,946
 7/16" (11mm)  6.3  93.7  13,200  5,989
 1/2" (12mm)  8.1  120.5  18,250  8,280
 5/8" (16mm)  12.0  178.6  29,750  13,498
 1" (24mm)  31.6  470.1  52,200  26,560
 1 1/8" (28mm)  35.0  520.6  79,500  36,071

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Good resistance to most minerals / organics, acids, weak alkalis, bleaches and other oxidizing agents and most solvents.

Heat:
Polyester melts at 480°F with progressive strength loss above 300°F. Technora decomposes at 900º F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 16:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core-to-Core Splice 

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the New England T-100 to your wish list.

You Recently Viewed...