Loading... Please wait...

New England T-900 x 600ft. Spool

  • New England T-900
Price:
$527.48
SKU:
NE275-SPOOL
Brand:
Weight:
19.00 LBS
Shipping:
Calculated at checkout


Product Description

**Larger diameters up to 1"+ available, call 509-291-3024 or email cbknot@cbknot.com for availability.

Product Description:
Unique double braid construction consisting of a 12 stand core of blended Technora and Dyneema SK-75 with a polyester cover.

Features:

  • High strength
  • Low stretch
  • Low Creep
  • Spliceable

Applications:

  • Halyards
  • Guys

Colors Available:

  • White
  • Red Fleck
  • Blue Fleck
  • Green Fleck

 Lengths Available:

  • 600'
SizeWeightTensile
lbs/100'g/mlbskg
 1/4" (6mm)  2.3  34.2  4,700  2,132
 5/16" (8mm)  3.2  47.6  6,800  3,085
 3/8" (10mm)  5.1  75.9  11,000  4,991
 7/16" (11mm)  5.5  81.8  14,300  6,492
 1/2" (12mm)  6.4  95.2  15,700  7,123
 9/16" (14mm)  8.8  130.9  21,750  9,868
 5/8" (16mm)  11.9  177.0  29,800  13,521
 3/4" (18mm)  13.0  193.4  35,000  15,880
 13/16" (20mm)  17.3  257.3  48,000  21,770
 7/8" (22mm)  20.3  302.0  58,000  26,316
 1" (24mm)  27.6  410.7  64,840  29,419
 26mm  30.0  446.0  74,300  33,711

Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Chemicals:
Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil. HMPE has good resistance to most minerals, organics, acids, and weak alkalines. HMPE also has excellent resistance to bleaches and other oxidizing agents and to most solvents.

Heat:
Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F. Technora melts at 1200' F.

Dielectrics:
Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Sheaves:
Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core to Core Splice

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the New England T-900 x 600ft. Spool to your wish list.

You Recently Viewed...