Loading... Please wait...

New England Endura Braid Winch Lines

  • New England Endura Braid Winch Lines
Call 509-291-3024 or email cbknot@cbknot.com for pricing.
10.00 LBS

Product Description

Product Description:
Made from Endura Braid, a double braid with a very high strength, extremely low stretch HMPE core with a durable polyester cover. Higher strength-to-diameter ratio enables smaller diameters to be put into service which can be advantageous when winch drum/take up length is a limiting factor. Eyes can be spliced on one or both ends and are available soft or with your choice of thimbles. We offer Galvanized, Heavy Duty Galvanized, Bronze, and Stainless Steel thimbles.


  • Factory spliced Eyes
  • Optional urethane coating can be applied to entire assembly or eyes only.


  • Winch Lines

Colors Available:

  • White
 1/2"  6.6  98.2  21,500  9,755
 5/8"  11.8  175.5  29,000  13,155
 3/4"  15.8  235.1  40,000  18,150
 7/8"  20.9  310.9  53,000  24,062
 1"  27.1  403.1  70,000  31,760
 1 1/8"  34.4  511.7  96,000  43,557

Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Polyester melts at 480°F with progressive strength loss above 300°F. HMPE melts at 300°F with progressive strength loss above 150°F.

Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.


Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core-to-Core Splice

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the New England Endura Braid Winch Lines to your wish list.

You Recently Viewed...