Loading... Please wait...

Our Newsletter

New England Sta-Set X by 600ft. Spool

  • New England Sta-set X
  • New England Sta-set X Colors
13.00 LBS
Calculated at checkout

Product Description

Patented parallel core design results in an all polyester rope with 30% less stretch and 20% greater strength than other polyester ropes (size for size).


  • Parallel core for less stretch
  • Spun fiber in cover for better handling
  • Spliceable
**Larger diameters available, call 509-291-3024 or email cbknot@cbknot.com for pricing and availability**


  • Halyards

 Colors Available:

  • White
  • Red Fleck
  • Blue Fleck
  • Green Fleck

Lengths Available:

  • 600
 3/16"  1.3  19.3  1,900  860
 1/4"  2.2  32.7  2,800  1,270
 5/16"  3.4  50.6  4,400  1,998
 3/8"  4.5  66.9  5,300  2,400
 7/16"  6.1  87.8  7,700  3,490
 1/2"  8.4  125.0  9,700  4,400

Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil.

Polyester melts at 480°F with progressive strength loss above 300°F.

Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Parallel Core Eye Splice 

Write your own product review

Product Reviews

  1. Great strength and flexibility 5 Star Review

    Posted by on 3rd Aug 2016

    I have been using the sta set X line for a number of years now to make horse halters. Horses just don't break them and they are light enough to fit under their bridle. I discovered the rope when replacing lines on my sailboat. I've since used several 600 foot spools to make halters.

Add to Wish List

Click the button below to add the New England Sta-Set X by 600ft. Spool to your wish list.

You Recently Viewed...