Teufelberger (New England) V-100 x 600ft. Spool

(No reviews yet) Write a Review
8.00 LBS
14.00 (in)
18.00 (in)
14.00 (in)
Current Stock:

Product Description:

Braided 100% Vectran 12 strand single braid core treated with our unique Marine-Tech coating for excellent abrasion and UV resistance. Tough durable polyester cover, wide spectrum of colors for all applications where high strength and low stretch is desired. 


  • Extremely high strength
  • Ultra-low stretch
  • Will not creep


  • Main and Genoa Halyards
  • Afterguys
  • Guys

Colors Available:

  • Red
  • Green
  • Blue
  • Black
  • White with Tracer
  • Black with Tracer
  • Red with Tracer
  • Blue with Tracer
  • Green with Tracer

Lengths Available:

  • 600' 
 3/16" (5mm)  1.5  22.3  2,400  1,090
 1/4" (6mm)  2.1  31.2  4,600  2,090
 5/16" (8mm)  3.5  52.1  8,600  3,900
 9mm  4.4  65.4  9,100  4,130
 3/8" (10mm)  5.3  78.8  12,600  5,725
 7/16" (11mm)  6.5  96.7  17,200  7,815
 1/2" (12mm)  7.1  105.6  19,200  8,725
 9/16" (14mm)  9.9  147.3  23,500  10,675
 5/8" (16mm)  13.4  199.3  26,000  11,810
 3/4" (18mm)  17.5  260.3  33,620  15,254

Very little degradation from sunlight. Can be used outside over long term if inspected regularly.

Good resistance to most minerals / organics, acids, weak alkalis, bleaches and other oxidizing agents and most solvents.

Polyester melts at 480°F with progressive strength loss above 300°F. Vectran melts at 660°F with progressive strength loss above 430°F.

Good resistance to the passage of electrical current. However, dirt, surface contaminants, water entrapment, and the like can significantly affect dielectric properties. Extreme caution should be exercised any time a rope is in the proximity of live circuits.

Recommended sheave diameter to rope diameter is 8:1.

Working Loads:
No blanket safe working load (SWL) recommendations can be made for any line because SWL's must be calculated based on application, conditions of use, and potential danger to personnel among other considerations. It is recommended that the end user establish working loads and safety factors based on best practices established by the end user's industry; by professional judgment and personal experience; and after thorough assessment of all risks. The SWL is a guideline for the use of a rope in good condition for non-critical applications and should be reduced where life, limb, or valuable property is involved, or in cases of exceptional service such as shock loading, sustained loading, severe vibration, etc. The Cordage Institute specifies that the SWL of a rope shall be determined by dividing the Minimum Tensile Strength of the rope by a safety factor. The safety factor ranges from 5 to 12 for non-critical uses and is typically set at 15 for life lines.

Splicing Instructions:
Core-to-Core Splice

Connect with us on Instagram @cbknot!